Industrial Cathedral

Industrial Cathedral
"Industrial Cathedral" charcoal on paper 131 x 131 cm Jane Bennett. Finalist in 1998 Dobell Drawing Prize Art Gallery of NSW Finalist 1998 Blake Prize Winner 1998 Hunter's Hill Open Art Prize

About Me

My photo
Sydney, NSW, Australia
I'm an Industrial Heritage Artist who paints "en plein air".If it's damaged, derelict, doomed and about to disappear, I'll be there to paint it.
Showing posts with label machinery. Show all posts
Showing posts with label machinery. Show all posts

Sunday 30 August 2020

Heavy Lifting

Plein air oil painting of crane lifting a boat at the Hungry Mile, East Darling harbour Wharves painted by marine artist Jane Bennett
DH143 Preparing for a boat lift
2007 oil on canvas 92 x 122cm

Available for sale

 










 
 
 
 
Today's painting on my easel on the deck gallery was a large canvas painted during my stint as "Artist in Residence" at the East Darling Harbour Wharves. Very few container ships were docked at the East Darling Harbour Wharves - in its last 5 years of operations most went to Botany, which handled container or "boxes" only. 
The East Darling Harbour Wharves specialized in break bulk cargo - items that can’t be transported by container, sometimes resulting in a diverse & rather incongruous payload. Sand, salt, gypsum was bagged or piled in gleaming unstable mounds on the wharf. Rolls of steel, pipes & timber lengths for construction were stacked in piles inside the sheds. Cars, vans, trucks, forklifts, excavators  & agricultural machinery were driven down the ramps of the Ro-ros at breakneck speed as though the wharfies were auditioning for yet another remake of ‘the Italian Job’ or the ‘Fast & the Furious”, & then parked in neat rows until they were lifted or driven onto B-doubles. 
A selection of excavators, mining or agricultural machinery and the ubiquitous rolls of steel coils would lie for weeks inside the sheds.  Luxurious 'hot-water' boats, most of which were larger than my house and definitely cost more, were nonchalantly lifted off the ships & dangled from the cranes like giant earrings. Some of these boats were so enormous that they looked almost capable of carrying the ship that brought them. There were even more oddball items such as helicopters, train carriages, yachts & caravans. And one unforgettable afternoon  a couple of horses broke free while being unloaded from their box and had to be caught and restabled, turning the wharf into a wild west show.
Plein air oil painting of crane lifting a boat at the Hungry Mile, East Darling harbour Wharves painted by marine artist Jane Bennett
DH143 Preparing for a boat lift
2007 oil on canvas 92 x 122cm

Available for sale














 
 
 
 
This canvas was painted from the centre of the area between the Patrick offices in Shed 5, looking north towards Shed 4, with the western end of Balmain in the background. The huge white shed of White Bay can be seen in the background in the gap between the crane & the boat that has just been unloaded.
The giant vermilion crane, “L3” is bathed in clear morning light, poised with its pink spreader aloft in mid air. It had just placed the boats on wooden structures known as “Nafis” so they could be hooked up to one of the 2 rather elderly forklifts to be positioned on the wharf until they were transferred onto a B-double truck & delivered to a marina. I asked whether the term ‘Nafi’ was an abbreviation or a brand name, or anything to do with the naval term 'Naafi" but nobody on the wharf seemed to know the origin of the word. Like many other items on the wharf, the Nafis were brightly painted, mostly in primary colours, but here there is an orange one on the left hand side & a green one on the left.  There were random clusters of them stacked neatly one on top of the other all over the wharf. 
The unnaturalistic colours of the machinery added to the pervasive feeling of living inside a Jeffrey Smart painting. The maintenance workers, who serviced the cranes & forklifts, always wore bright orange overalls, of exactly the same hue as the witches hats. I know that none of it was arranged deliberately to help me compose my painting, but there was a pleasing compositional triangle of the orange –clothed workman striding purposefully away from the orange sled, with the orange witches hat in the foreground. The spreader directly above his head also has a matching orange “A” shaped crane attachment, although to strike a discordant note, its framework is a teeth-jarring shade of pink. The reds, pinks & oranges of the machinery stand out strongly against the large expanse of clear pale blue sky & matching strip of sea are interrupted by the sap green of the trees of Balmain in the background. Oddly, the completed painting has the poise and compositional balance of Jeffrey Smart and Edward Hopper, although painted under infinitely more trying circumstances than a neat white studio. Although large & complex, this was a pure plein air painting- totally painted outdoors, no photography, no tricks. Just the culmination of a lifetime of observation.
It was an eye-opening experience to be able to see first-hand, how much work & how many people have to be involved in providing goods that we take for granted.
This was painted in September 2007, in the last few weeks of East Darling Harbour Wharves activity as an operational wharf. The following week, all three shore cranes were repainted in the yellow & white colours of AT & T livery, prior to being moved onto a barge & towed to their new homes in Webb Dock, Melbourne & Port Kembla.
Related Posts 
 
 
 
 
 
 

Monday 13 July 2020

Meltdown-Oxycutting, William Wallbank and Sons, Auburn

The now derelict 'William Wallbank and Sons' was a foundry on the Parramatta Road, Auburn, built in 1932.
I've been painting the machinery before it is all stripped out and sent to a scrap metal yard.
Plein air painting of oxycutting machinery in the interior of the disused foundry William Wallbank and Sons, Auburn painted by industrial heritage artist Jane Bennett
AWW5 Oxycutting, William Wallbank + Sons foundry
2017 oil on canvas 46cm tondo














Some of the ladles and other machinery that couldn't be sold intact were being broken up for scrap by oxycutting. 
During this exciting process, I painted some small and medium circular canvases, known as tondos.
In Art, the circular format of the tondo was often used for religious subjects.
Extreme chiaroscuro was also exploited by artists such as Caravaggio, to heighten the contrast between the gloomy background and the intensely illuminated saints or angels.
The fire in the dim interior gave the scene a mysterious atmosphere, reminding me of the nocturnal paintings of one of my favourite artists, Georges de la Tour.
Figures in his paintings are enveloped in shifting accretions of darkness - hands and features picked out by pooling, smoky light.
 
Plein air painting of oxycutting machinery in the interior of the disused foundry William Wallbank and Sons, Auburn painted by industrial heritage artist Jane Bennett
AWW5 Oxycutting, William Wallbank + Sons foundry
2017 oil on canvas 46cm tondo"















Oxycutting is one of the oldest welding processes.
A torch is used to heat the metal to its kindling temperature. When it's cherry red, a stream of oxygen is focused on the heated part and chemically reacts with the ferrous metal, producing more heat and forming molten iron oxide which is then blasted out of the cut.
The melting point of the iron oxide is about half that of the metal being cut, so it will immediately turn to liquid iron oxide and flow away from the cutting zone.
Plein air painting of oxycutting machinery in the interior of the disused foundry William Wallbank and Sons, Auburn painted by industrial heritage artist Jane Bennett
AWW5 Oxycutting, William Wallbank + Sons foundry
2017 oil on canvas 46cm tondo"














Starting a cut in the middle of a workpiece is known as piercing.
Once it has started, steel can be cut surprisingly quickly, far faster than if it were completely melted through.
Sometimes remnants of iron oxide remain on the workpiece, forming a hard "slag" which can be removed by tapping or grinding.
Plein air painting of oxycutting machinery in the interior of the disused foundry William Wallbank and Sons, Auburn painted by industrial heritage artist Jane Bennett
AWW6 Oxycutting, William Wallbank + Sons foundry
2017 acrylic on paper 56 x 76cm

















The hottest part of the flame is approximately 6,000 °F (3,300 °C) - hot enough to easily melt steel.
But the flame of the cutting torch is not intended to melt the metal, just bring it to its ignition temperature.
The rest of the heat is created by the burning metal itself.
Plein air painting of oxycutting machinery in the interior of the disused foundry William Wallbank and Sons, Auburn painted by industrial heritage artist Jane Bennett
AWW5 Oxycutting, William Wallbank + Sons foundry
2017 oil on canvas 46cm tondo"
.
A basic oxy-acetylene rig is faster than a petrol-driven cut-off grinder, as well as lighter, smaller, quieter and not as prone to severe vibration. 
Oxy-acetylene torches can easily cut through ferrous materials as thick as 200 mm. 
However oxy-acetylene has its limitations. It can only efficiently cut low- to medium-carbon steels and wrought iron.
High-carbon steels aren't suitable because the melting point of the slag is closer to the melting point of the parent meta.The slag from the cutting action mixes with the clean melt near the cut, which means the oxygen doesn't reach the clean metal to burn it. With cast iron, graphite between the grains interferes with the cutting action of the torch. Stainless steels can't be cut either with this process, because the material doesn't burn as easily.
Plein air painting of oxycutting machinery in the interior of the disused foundry William Wallbank and Sons, Auburn painted by industrial heritage artist Jane Bennett
AWW7 Oxycutting, William Wallbank + Sons foundry 2
2017 oil on canvas 46cm tondo
Painting this was fascinating, but there was an undercurrent of sadness, as it
marked the point of no return.
The life of the former foundry was at an end, and its vivisection will be the last fires lit inside.

"Some say the world will end in fire,
Some say in ice.
From what I’ve tasted of desire
I hold with those who favor fire.
But if it had to perish twice,
I think I know enough of hate
To say that for destruction ice
Is also great
And would suffice."

"Fire and Ice" by Robert Frost

Related posts

Rust Bucket

Steady Rest

Scar Tissue

Wrong side of the tracks - Darling Island Bond and Free

All fired up

Eveleigh - Industrial heritage artist at work

Irons in the fire

White Bay Power Station - Inside Out

Power Base - Artist in Residence at the White Bay Power Station

Tuesday 7 July 2020

Shadowboard

A shadow board is one of the most common options for tool storage found in amateur and professional workshops and sheds the world over. Its noble aim is to organize the workplace so that tools are near the work station where they are to be used.
plein air oil painting of still life of tools and machinery interior of the Large Erecting Shop, Eveleigh Railway Workshops painted by industrial heritage artist Jane Bennett
Work in progress on the easel
E135A 'Shadowboard - No Brake' 2017
oil on metal panel 51 x 51cm
Available

















Shadow boards have the outlines of a work station's tools marked on them, so operators can quickly identify which tools are in use or missing.
As well as providing easy access to tools,they are supposed to reduce time spent searching for the correct tool; to reduce losses due to carelessness, lack of proper maintenance or theft; to improve work station safety as tools are replaced safely after use, rather than becoming potential hazards; to reduce clutter; and to maximize the space available.

plein air oil painting of still life of tools and machinery interior of the Large Erecting Shop, Eveleigh Railway Workshops painted by industrial heritage artist Jane Bennett
Work in progress on the easel
E135A 'Shadowboard - No Brake' 2017
oil on metal panel 51 x 51cm
Available
















Well that was the Platonic ideal anyway.
The dream of imposing order on chaos is often cruelly exposed as exactly that - a dream, when reality kicks in.
How should a shadowboard be organized?
Sounds so easy and straightforward, but it reveals fundamental and often irreconcilable differences in temperament, age and level of expertise, and can be the source of perpetual bickering, even long-running feuds.

plein air oil painting of still life of tools and machinery interior of the Large Erecting Shop, Eveleigh Railway Workshops painted by industrial heritage artist Jane Bennett
Work in progress on the easel
E135A 'Shadowboard - No Brake' 2017
oil on metal panel 51 x 51cm
Available















Should it be organized by type of tool (all spanners, screwdrivers etc grouped together), by size (aesthetically pleasing to have a hierarchy of tools descending by size, but not necessarily the most practical), by frequency of use (commonly used tools in the middle where they are easily removed or replaced) by ease of removal /replacement (large, awkwardly sized or heavy tools placed where people don't have to reach up or down for them) or by what is required for common tasks (a particular size of wrench/saw/hammer/screwdriver etc are often needed together for a task that crops up frequently).
Sometimes it can even be a passive-aggressive wish list, like a recent commercial for a hardware line of products where empty outlines were left for needed or desired tools, either in hope of a future financial windfall or thoughtful gift.
Plein air oil painting of the interior of the Large Erecting Shop in the Eveleigh Railway Workshops painted by industrial heritage artist Jane Bennett
E135B'Shadowboard with 44 class diesel
-(Do not pull all way out) '
2017 oil on metal panel 51 x 51cm
Available






















The usual result is a hotch potch of all the above.
Jumble of the useful, the once useful and now obsolete, the broken bits, the spare parts that 'may come in handy'; the lost, strayed and some frankly useless items that seem to breed unchecked in dark corners. When, if ever, were any of these used? Last week? Last century?
plein air oil painting of 44 class diesel with still life of tools and machinery interior of the Large Erecting Shop, Eveleigh Railway Workshops painted by industrial heritage artist Jane Bennett
Work in progress on the easel
E135B'Shadowboard with 44 class diesel
-(Do not pull all way out) '
2017 oil on metal panel 51 x 51cm
Available

















I used metal panels to paint on instead of my usual canvas, leaving the metal bare when the tool was shiny and well maintained, and only painting the non-metallic or rusty parts. The work above also includes a 44 class diesel lurking in the background.
The faded, naive lettering found on cryptic signs create abstract yet evocative grids of letters and word fragments, colour and text fading into meditative, elegiac compositions.
Other mysteries abound. As this is a workshop filled with tools and presumably people who know how to use them, why did someone bother to write "Do not pull all way out" on the drawers of the cabinet beneath, instead of fixing the drawer?
I'm no handyperson, but even I can fix drawers - it's fiddly but not that hard.
Plein air oil painting of the interior of the Large Erecting Shop in the Eveleigh Railway Workshops painted by industrial heritage artist Jane Bennett
E135A 'Shadowboard - No Brake' 2017
oil on metal panel 51 x 51cm
Available























A massive Marie Kondo attack has been carried out in the Large Erecting Shop to tackle decades of clutter. Nothing to do with sparking joy.
Everything deemed not strictly necessary to the re-purposing of the Large Erecting Shop as a running shed is being given the old heave-ho - best case scenario sent to Thirlmere, worst case - the skip.
I was chased from one end of the shed to the other, as wherever I set up my easel, I seemed to get in the way. I was hunting for a quiet corner as the situation brought out crankiness in normally laid back people. I was incessantly asked "why I was painting this rubbish instead of the trains", but most of the trains will still exist somewhere, while this sort of subject, evoking the true spirit of the workshop, is ephemeral.
But fashions change as to what is deemed 'necessary' and unique and quirky items can be lost or destroyed in the rush to impose order on chaos..
In the Large Erecting Shop the shadowboards are no longer functional as no repair or maintenance will be carried out there.
Ghost boards with ghost signs for ghost trains.
They show the never to be filled outlines of lost tools for lost purposes.
Headstones of the workshop.